KSR GT - GUIDED MICROWAVE

Measuring principle High frequency microwave pulses are coupled to a rod and guided along the probe (TDR) The pulses are reflected by the surface of the product and received by the analysis electronics. A microprocessor identifies these level echoes, which are measured, analysed and converted to level information using ECHOFOX® software. Thanks to this measurement principle there is no need for time-consuming adaptation to the product. The units are already adjusted to the probe length ordered. Properties Microwaves are virtually independent of all process conditions. They are, for example, not sensitive to dust and vapour - even process conditions such as strong vapour atmospheres do not influence the accuracy of the measurement. The rod designs can be shortened to and thus adapted to any conditions on site. They are also independent of fluctuations in the material: fluctuations in density or changes in the dielectric number have no effect on the accuracy. Even adhesions to the KSR GT are not a problem! Strong adhesions on the probe or on the container wall have no effect on the measurement result. This gives high measurement accuracy and good repeatability and also extremely simple commissioning without filling. Also: electronics in two and four wire technology, replaceable and cut-to-length measuring probes. KSR GT can be used across industrial boundaries: in chemicals and petrochemicals, in shipbuilding, on/offshore engineering, and in the food stuffs and pharmaceuticals industry. Redundant level measurement Up to three independent measurement principles in one system enable redundant measuring results. Level sensor Guided microwave KSR GT Visual level indicator The possibilities Single Bypass System with KSR-GT 655/666 coax version Double Bypass System with KSR GT 611/666 rod version Individual reference vessel with KSR GT 611/666 rod version Sight glass indicators with KSR FX 611 These individual possibilities fulfil a wide range of uses in line with the requirements set. General details Display and operation Module PLICSCOM / PC with PACTware, HART operating unit Signal analysis ECHOFOX ® for echo analysis with Fuzzy-Logic Measurement accuracy Rod version +/- 5 mm, Coax version +/- 3 mm Dielectric number Rod version 1,7 – Coax version 1,4 Measuring range up to 6 m Areas of application Temperature -100 to 400° C Pressure -1 to 160 bar Materials in contact with the medium 1.4435 (316L), Hastelloy 2.4602 (C22) Approvals ATEX II 1G, 1/2G, 2G EEx ia IC T6 ATEX ATEX II 1/2G, 2G EEx d ia IIC T6 ATEX II 1/2D IP6X T WHG Ship building approvals More Info Price